|
|
BOKING INDUSTRY CO.,LTD
Products >> Light Weight Polisher, Foredom BL-2 Polishing Machine Bench Lath
Build Your Online Product Catalogs?
| Product Name: |
Light Weight Polisher, Foredom BL-2 Polishing Machine Bench Lath
|
| Supply Ability: |
10000000 |
| Related proudcts |
polishing machine, bench lath, foredom polishe, |
| Specifications |
26.5*15*15.5cm |
| Price Term: |
FOB |
| Port of loading: |
Shenzhen |
| Minimum Order |
1 |
| Unit Price: |
|
|
1.Foredom BL-2 Polishing Machine
2.Polishing Machine, polishing motor
3.Jewelery polishing machine
4.Delivery on time.
5.High quality low price
6.MOQ: 1 pc
Model No.:BK-0099
Description:
Weight:3kg,
Height:5*1/8(130mm),
Width:13"(330mm)between spindles,
Packing Size:26.5*15*15.5cm
1/6HP high Torque Motor 125 Watts (continuous,rating) 5/16" Dia.Dotor.Shaft Ball Bearing 0-10000RPM.
Guideline for Buffing and Polishing
Type of Material Iron, Steel
Hard Metals Brass,Cooper
Soft Metals Gold ,Siver
Plated ,Solid Brass Plate
Copper Plate
Plastic
Operation Cut color Cut color Cut color Cut color Cut color
FOREDOM Compound Emery White
(#4001) Rouge
(#4003) Tripoli White
(#4002) Rouge
(#4003) Do Red
Not Rouge
Cut (#4004) Do Tripol
Not (#4002)
Cut Tripoli White (#4002) Rouge
(#4003)
SFPM To figure Surface Feet Per Minute:
1/4diameter (in inches )of wheel x spindle speed in RPM = SFPM
Generally,speed of 1750 to 2450 is recommened for polishing.
Buffing requires a higher speed of approximately 3450 to 7000 SFPM
Bench Lathe Attachments: Tapered Spindles. Wheel Mandrels .Cha-1Collet Holder ,CHA-4 Collet Holder , BO-14N Flexade
O peration
Advantage:
B ecause of the higher maximum speed (approximately 7,000RPM to 7,500 RPM) and variable speed control,the Foredom Bench Lathe has several advantage over concentional single or two polishing and buffing lathes:
1.The same size buffing wheel can be used to obtain different suface , as measured in surface feet per mimute (SFPM). A3 or 4 diameter buff can provide the 1,750 to 3,450 SFPM recommended for buffing ,The chart below shows the SFPM obtained with different diameter wheels at full ,medium ,and low speeds,
2.The SFPM can be varied while will using the same wheel ,This willl give better results on different types of material.
3.The 7,000 RPM maximum speed will enable you to get much higher SFPM with smaller buffs such as 1 to 2 buffs or inside ring buffs than slowe |
| Company: |
BOKING INDUSTRY CO.,LTD
|
| Contact: |
Mr. Jacky Xiang |
| Address: |
2nd Road Jianan, Liutang, Baoan District, Shenzhen, China |
| Postcode: |
518101 |
| Tel: |
86 075 27944158 |
| Fax: |
86 755 61640725 |
| E-mail: |
|
|
|
|
Home
